Dynam 40 Amp ESC Brushless Ground Controller
Free Ground Shipping
Dynam ESC s provide an exceptional value and reliability with features normally found only on much more expensive brushless speed controllers. Torture tested by our pilots, Dynam electronic speed controllers exceeded all expectations. With simplicity in mind, all Dynam ESC s are easily programmed with the throttle stick on your transmitter or with the optional programming card.
Electrical Specifications:
| Maximum Current: |
40 Amps |
| Number of Li-Poly Cells: |
2-3 Cells |
| Number of NiMh/NiCd Cells: |
6-10 Cells |
| BEC: |
3 Amp* |
Physical Specifications:
| Length: |
1.97 inches |
| Width: |
0.98 inches |
| Height: |
0.28 inches |
| Weight: |
0.81 ounces or 23 grams |
Programmable Options:
- Brake: On /Off
- Motor Timing: Inrunner or Outrunner
- Hard Cut off: Motor cuts off immediately after reaching cut off voltage
- Soft Cut off: Motor turns off slowly by power reduction
- Throttle Curve Linear: Half throttle is equal as 50% of maximum RPM
- Throttle Curve Logarithm: Half throttle is equal as 80% of maximum RPM
- Default Cut-off Voltage:0.9 Volts per cell for Nimh, 3.0 Volts per cell for Li-poly
 Download the Manual
*
Dynam recommends using no more than 4 servos with a 2 cell li-poly and no more than 3 servos with a 3 cell li-poly.
|
HAVE QUESTIONS? CALL US: 714-982-2738
